Toyota Land Cruiser 70/73 PU Bushing Set

• Toyota

• Land Cruiser 70

Renew the key axle-location bushes on your Toyota Land Cruiser 70 Series and restore more controlled axle movement under braking, acceleration and cornering. Soft, cracked or worn original rubber bushes can allow unwanted fore-and-aft and lateral movement of both solid axles.

This orange 75 Shore A polyurethane kit covers the listed front and rear control-arm and Panhard-rod mounting points. It uses regular concentric bushes and is designed for road use, overland travel and mixed off-road driving.

Key details

• Fits: Toyota Land Cruiser 70 Series from 1991
• Position: Front and rear control arms and Panhard rods
• Options: 35 or 40 mm width at the frame-side control-arm mounts
• Version: Regular concentric PU bushes, not eccentric correction bushes
• Material: Polyurethane
• Hardness: 75 Shore A
• Colour: Orange

Measure before ordering

Measure the width of the existing frame-side bushes or control-arm mounts at both axles. Your selected option determines whether the kit includes the 35 or 40 mm mounting points.

More defined axle location

Aged rubber can deform more heavily under braking, drive and lateral forces. Polyurethane retains its shape better and can therefore reduce unwanted fore-and-aft movement at the control arms and lateral movement at the Panhard rods.

The final result also depends on the condition of the arms, rods, bolts, mounting points, wheel bearings, steering and dampers.

Kit contents

• Front control arms, axle side: 4 regular PU bushes and 4 metal sleeves
• Front control arms, chassis side: 2 PU bushes and 2 metal sleeves in the selected width
• Rear control arms, axle side: 4 regular PU bushes and 4 metal sleeves
• Rear control arms, chassis side: 2 PU bushes and 2 metal sleeves in the selected width
• Front Panhard rod: 2 PU bushes and 2 metal sleeves
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves

Installation note

Inspect the control arms, Panhard rods, bolts and mounts for corrosion, elongated holes or deformation. Check axle position and suspension geometry professionally after installation.