PU Bush Set for Jeep Grand Cherokee ZJ / ZG

• Jeep

• ZJ ZG Grand Cherokee

On the Jeep Grand Cherokee ZJ/ZG, the control-arm bushes and front Panhard rod play a major role in keeping the front and rear solid axles accurately located under load. Soft or worn rubber bushes can allow additional axle movement and make the vehicle feel less precise.

This orange polyurethane kit renews the listed mounting points on both solid axles. The control-arm bushes are rated at 75 Shore A, while the front Panhard-rod bushes use a firmer 90 Shore A compound.

Key specifications

• Fits: Jeep Grand Cherokee ZJ and ZG
• Material: Polyurethane
• Main bush hardness: 75 Shore A
• Front Panhard rod: 90 Shore A
• Colour: Orange

More precise axle location

Polyurethane deflects less than aged rubber under braking, cornering and drive forces. This can help keep the axles and control arms closer to their intended position. The final result also depends on the condition of the ball joints, steering components, wheel bearings and the rest of the suspension.

Kit contents

• Front lower control arms: 4 PU bushes and 4 metal sleeves
• Front upper control arms: 4 PU bushes and 4 metal sleeves
• Rear lower control arms: 4 PU bushes and 4 metal sleeves
• Rear upper control arms: 4 PU bushes and 4 metal sleeves
• Front Panhard rod: 3 PU bushes, 90 Shore A, and 3 metal sleeves
• Front anti-roll bar: 2 PU bushes for 26 mm diameter
• Rear anti-roll bar: 2 PU bushes for 16 mm diameter
• Anti-roll-bar links: 8 PU bushes and 2 metal sleeves
• Shock-absorber mounts: 6 PU bushes

Installation note

At the designated control-arm positions, remove only the old rubber; the original outer metal shell remains in the arm. Mark the installation positions before disassembly and inspect all control arms, bolts and mounting points for wear or deformation.