PU Bushing Set for Jeep Grand Cherokee ZJ / ZG

• Jeep

• ZJ ZG Grand Cherokee

Renew the main axle-location and anti-roll-bar bushes on your Jeep Grand Cherokee ZJ/ZG. The control arms and front Panhard rod determine how precisely both solid axles remain located under braking, cornering and drive forces.

This orange polyurethane kit uses 75 Shore A for the main control-arm bushes and 90 Shore A for the front Panhard-rod positions.

Key details

• Fits: Jeep Grand Cherokee ZJ and ZG
• Main-bush hardness: 75 Shore A
• Front Panhard-rod hardness: 90 Shore A
• Colour: Orange
• Material: Polyurethane

More defined axle location

Polyurethane deforms less than aged rubber under braking, cornering and drive forces. This can help retain axle and control-arm position more consistently. The final result also depends on ball joints, steering, wheel bearings and the rest of the suspension.

Kit contents

• Front lower control arms: 4 PU bushes and 4 metal sleeves
• Front upper control arms: 4 PU bushes and 4 metal sleeves
• Rear lower control arms: 4 PU bushes and 4 metal sleeves
• Rear upper control arms: 4 PU bushes and 4 metal sleeves
• Front Panhard rod: 3 PU bushes in 90 Shore A and 3 metal sleeves
• Front anti-roll bar: 2 PU bushes
• Rear anti-roll bar: 2 PU bushes
• Anti-roll-bar links: 8 PU bushes and 2 metal sleeves
• Shock-absorber mounts: 6 PU bushes

Installation note

At the designated control-arm positions, remove only the old rubber; the original outer metal shell remains in the arm. Mark all positions before removal and inspect all arms, bolts and mounting points for wear or deformation.