XL PU Bushing Set for Jeep Grand Cherokee WJ / WG

• Jeep

• WJ WG Grand Cherokee

Renew the main axle-location and anti-roll-bar bushes on your Jeep Grand Cherokee WJ/WG with one comprehensive XL kit. Soft or worn original rubber can allow additional axle movement and play at the anti-roll bars and rear links.

This orange 75 Shore A polyurethane set covers the listed front and rear suspension positions and is designed for road use, overland travel and mixed off-road driving.

Key details

• Fits: Jeep Grand Cherokee WJ and WG
• Position: Control arms, front Panhard rod, anti-roll bars and rear links
• Version: XL standard
• Material: Polyurethane
• Hardness: 75 Shore A
• Colour: Orange

More defined axle location

Aged rubber can deform more heavily under braking, drive and lateral forces. Polyurethane retains its shape better and can reduce unwanted fore-and-aft movement at the control arms and lateral movement at the Panhard rod.

The final result also depends on joints, bolts, mounting points, wheel bearings, steering, anti-roll bars and dampers.

Kit contents

• Front lower control arms: 4 PU bushes and 4 metal sleeves
• Front upper control arms: 4 PU bushes and 4 metal sleeves
• Rear lower control arms: 4 PU bushes and 4 metal sleeves
• Front Panhard rod: 2 PU bushes and 2 metal sleeves
• Front anti-roll bar: 2 PU bushes
• Rear anti-roll bar: 2 PU bushes
• Rear anti-roll-bar links: 4 PU bushes and 4 metal sleeves

Important note on the original outer sleeves

The original outer metal sleeves remain in the front control arms and rear lower control arms. Remove only the old rubber without damaging these sleeves; the new PU bushes are installed into the retained original sleeves.

Installation note

Inspect all arms, sleeves, bolts and mounting points for corrosion, scoring or deformation. Work on axle-location components should be carried out professionally.