Suzuki Vitara I 50 mm (2 in) Body Lift Kit

• Suzuki

• Vitara

Create extra clearance between the tyres and body of your first-generation Suzuki Vitara without changing the suspension itself. This body lift kit raises the body 50 mm from the chassis while leaving the axles, differentials and actual suspension travel unchanged.

The orange polyurethane spacers are rated at 90 Shore A. This kit is specifically designed for the Vitara I built up to May 1999 and is not suitable for the later Grand Vitara.

Key details

• Fits: Suzuki Vitara I, 1988–05/1999
• Not suitable for: Suzuki Grand Vitara
• Body lift: 50 mm / approximately 2 in
• Material: Polyurethane
• Hardness: 90 Shore A
• Colour: Orange

What a body lift changes

After installation, the body sits higher on the chassis, providing additional room in the wheel arches. Ground clearance beneath the axles and differentials remains unchanged.

Depending on the vehicle's condition and existing modifications, adjustments may be required to the steering shaft, brake lines, hoses, wiring, gear levers, fan shroud or fan clearance.

Kit contents

• 8 PU spacers for the main body mounting points
• 4 additional support pads
• 2 grade 8.8 bolts
• 2 metal sleeves
• 6 threaded-stud extensions
• 6 washers

Technical and approval information

No German ABE or parts certificate is supplied. The kit is therefore not approved for public-road use in Germany without further approval. Discuss the possibility of individual approval with an authorised inspection body before purchase and installation; approval cannot be guaranteed.

Installation affects the connection between the chassis and body and must be carried out professionally. After fitting, check all lines, hoses, cables, controls and component clearances throughout their full range of movement.